目錄
第1章 電氣化軌道交通概述 1
1.1 電氣化軌道交通的起源與發展 1
1.2 牽引供電系統的基本組成 2
1.3 牽引網的供電方式 7
1.4 接觸網的形式與特性 10
1.5 電氣化軌道交通對接觸網的基本要求 16
1.6 接觸網的研究?jī)?nèi)容與發展方向 17
1.7* 與接觸網相關的鐵道常識 18
第2章 接觸網的設備與結構 33
2.1 支柱與基礎 33
2.2 接觸網橫向結構——支持與定位 35
2.3 懸掛與線索 47
2.4 接觸網的縱向結構 75
2.5 接觸網的電氣特性與安全 94
2.6 接觸網零部件 115
第3章 接觸軌 119
3.1 第三軌 119
3.2 架空接觸軌 126
第4章 氣象條件對接觸網的影響 134
4.1 選擇設計氣象條件的基本原則 134
4.2 溫度對接觸網的影響及取值 136
4.3 風對接觸網的影響及取值 138
4.4 冰雪對接觸網的影響及取值 144
4.5 空氣中的活性物質對接觸網的影響 147
4.6 雷電日和雷閃頻數 149
4.7 地震震級和地震烈度 149
4.8 其他計算氣象參數 151
第5章 接觸網的機械計算 153
5.1 基本荷載及其計算 153
5.2 弛度和張力計算 158
5.3 最大許用跨距的確定 165
5.4 錨段長度的確定 187
5.5 安裝曲線的計算與繪制 198
5.6 腕臂及腕臂柱荷載分析與計算 207
5.7 軟橫跨支柱荷載計算 220
5.8 支柱基礎的穩定性校驗 224
第6章 電氣化鐵路接觸網的電氣特性與計算 236
6.1 接觸網的載流量 236
6.2 接觸網電場 243
6.3 接觸網的電磁影響 246
6.4 諧波干擾 249
第7章 弓網系統設計 252
7.1 概述 252
7.2 受電弓的基本特性 253
7.3 受電弓的性能優化 257
7.4 弓網相互作用特性 262
7.5 弓網動態相互作用仿真 278
7.6 弓網參數對集電質量的影響 291
第8章 接觸網工程設計 303
8.1 設計內容與標準 303
8.2 平面圖及平面布置 314
8.3 接觸網CAD概述 326
第9章 接觸網施工與管理 330
9.1 施工流程與工藝 330
9.2 接觸網施工管理 351
第10章 接觸網施工計算 359
10.1 腕臂預配計算 359
10.2 整體吊弦長度計算 366
10.3 軟橫跨結構預制計算 370
第11章 接觸網運營與管理 377
11.1 運營機構及職能 377
11.2 作業制度和管理 378
11.3 工程介入 388
11.4 接觸網信息管理系統 391
第12章 接觸網檢測與狀態評估技術 394
12.1 接觸網檢測概述 394
12.2 接觸線空間位置參數的測量 395
12.3 接觸網彈性測量 397
12.4 弓網接觸力測量 398
12.5 燃弧的測量 402
12.6 定位點處接觸線抬升的測量 403
12.7 接觸網溫度的測量 404
12.8 接觸網視覺巡檢裝置 405
12.9 接觸網狀態評估 407
第13章 接觸網課程設計 411
13.1 課程設計的目的和要求 411
13.2 課程設計的基本任務 411
13.3 課程設計的基本流程和內容 413
13.4 課程設計應提交的設計文件和要求 414
13.5 課程設計中應正確對待的幾個問題 415
附錄1 接觸網常用支柱參數表 416
附錄2 接觸網常用各類銅絞線的機電參數 422
附錄3 接觸網常用各類鋼鋁絞線的機電參數 425
附錄4 接觸網平面圖圖例 428
附錄5 接觸網站場平面圖［站場咽喉區部分］ 插頁
附錄6 接觸平面圖（工程數量、設計說明、圖標部分） 插頁
主要參考文獻 430
Table of Contents
1 Introduction to electrical rail transit 1
1.1 Origin of electrical rail transit 1
1.2 Main components of traction power supply system 2
1.3 Types of traction power supply systems 7
1.4 Types and characteristics of overhead contact line system 10
1.5 General requirements of electrical rail transit 16
1.6 Main researches and their development 17
1.7 General railway knowledge related to overhead contact line system 18
2 Installations and structures 33
2.1 Poles and foundations 33
2.2 Supporting assembly 35
2.3 Catenary suspension and cables 47
2.4 Structures along the track 75
2.5 Electrical safety device/equipment 94
2.6 Components 115
3 Conductor rail system 119
3.1 Third rail Power supply system 119
3.2 Overhead conductor rail 126
4 Climatic conditions 134
4.1 General specifications on the selection of climatic parameters 134
4.2 Temperature 136
4.3 Wind velocities and wind loads 138
4.4 Ice and snow accumulation 144
4.5 Active substances in the air 147
4.6 Lightning voltage surges 149
4.7 Earthquake and its damages 149
4.8 Others 151
5 Mechanical calculation 153
5.1 Basic loads and their calculation 153
5.2 Calculation of sag and tensile force 158
5.3 Determination of maximum permissible span length 165
5.4 Determination of tension length 187
5.5 Calculation and plot of conductor state�瞔hange curve 198
5.6 Load analysis and calculation of cantilevers and poles 207
5.7 Load calculation on Head�瞫pan poles 220
5.8 Verification of the stability of foundations 224
6 Electrical calculation 236
6.1 Ampacity calculation 236
6.2 Electric field calculation 243
6.3 Systems and their calculations 246
6.4 Harmonic interference 249
7 Design of pantograph and overhead contact line system 252
7.1 General 252
7.2 General characteristics of pantographs 253
7.3 Performance optimization of pantographs 257
7.4 Interaction between pantographs and overhead contact line systems 262
7.5 Simulation of the dynamic interaction between contact line pantograph and overhead 278
7.6 Influences on current collection quality 291
8 Engineering design 303
8.1 Substance and standard 303
8.2 Layout plan 314
8.3 Introduction to CAD design 326
9 Construction technology and engineering management 330
9.1 Construction process 330
9.2 Engineering management 351
10 Construction calculation 359
10.1 Dock planner calculation of supporting assembly 359
10.2 Calculation of the integral dropper length 366
10.3 Configuration the geometrical parameters of head�瞫pan 370
11 Management and maintenance 377
11.1O perating agency and its function 377
11.2O perating system and management 378
11.3 Participant in construction 388
11.4 Information management system 391
12 Detection and status evaluation technology 394
12.1 Introduction to the detection 394
12.2 Geometric measurement 395
12.3 Elasticity measurement 397
12.4 Contact force measurement 398
12.5 Electric arc measurement 402
12.6 Uplift value measurement of contact wire at supports 403
12.7 Temperature measurement 404
12.8 Visual inspection device 405
12.9 Status evaluation 407
13 Curriculum design 411
13.1 Objective and requirements 411
13.2 Basic tasks 411
13.3 Basic procedure and main contents 413
13.4 Required design document and its requirements 414
13.5 noticed questions 415
Appendix1 Parameters list for commonly used pole of overhead contact line system 416
Appendix2 Mechanical and electrical parameters of strand conductor made of copper 422
Appendix3 Mechanical and electrical parameters of strand conductor made of steel and aluminum 425
Appendix4 Symbols for the overhead contact line used in layout plans 428
Appendix5 Overhead contact lines layout (partial view) illustration illustration
Appendix6 Overhead contact lines layout (engineering quantity,desing explanation, icons section illustration illustration
Reference 430