目錄
自序
前言
出版說明
第1篇“鑄造及凝固過程建模與仿真”代表性學術論文
綜述論文2
1. 3D Modeling and Simulation of Dendritic Growth during Solidification3
2.鑄造過程的多尺度模擬研究進展10
3. Phase-field simulation of solidification in multicomponent alloys coupled with thermodynamic
and diffusion mobility databases22
4. Advances in Multi-scale Modeling of Solidification and Casting Processes28
5.汽車工業鎂合金壓鑄成形技術及模擬仿真38
6. Simulation and experimental validation of three-dimensional dendrite growth50
航空及重燃葉片建模與仿真57
7. MODELING OF DIRECTIONAL SOLIDIFICATION PROCESS OF SUPERALLOY
TURBINE BLADE CASTINGS58
8. Numerical Simulation of Solidification Process on Single Crystal Ni-Based Superalloy
Investment Castings65
9.Modeling of Grain Selection during Directional Solidification of Single Crystal Superalloy
Turbine Blade Castings75
10. NUMERICAL SIMULATION OF TEMPERATURE FIELD IN DIRECTIONAL SOLIDIFICATION
OF TURBINE BLADE BY LIQUID METAL COOLING METHOD81
11. Multiscale Modeling and Simulation of Directional Solidification Process of Turbine Blade
Casting with MCA Method87
12. Numerical Simulation and Optimization of Directional Solidification Process of Single
Crystal Superalloy Casting95
13. Deformation and recrystallization of single crystal nickel-based superalloys during investment
casting106
14. Numerical simulation of dendrite growth in nickel-based superalloy and validated by in-situ
observation using high temperature confocal laser scanning microscopy123
15. A model for simulation of recrystallization microstructure in single-crystal superalloy140
輕量化材料工藝建模與仿真149
16. Preliminary Study on Simulation of Microporosity Evolution and Fatigue Life of Aluminum
Alloy Casting 150
17. Processing Technology and Mechanical Properties of Die-Cast Magnesium Alloy AZ91D156
18. Influences of Casting Pressure Conditions on the Quality and Properties of a Magnesium
Cylinder Head Cover Die Casting161
19. Numerical Modeling of Microstructure Evolution and Dendrite Growth for Al-Si Alloy Casting
during Low Pressure Die Casting 168
20. Dendrite growth modelling of cast magnesium alloy174
21. Simulation of Magnesium Alloy AZ91D Microstructure Using Modified Cellular Automaton
Method179
22. Cellular automaton simulation of three-dimensional dendrite growth in Al-7Si-Mg ternary
aluminum alloys185
23. A phase field model for simulating the precipitation of multi-variant β-Mg17Al12 in
Mg-Al-based alloys200
大型鑄件及鋼錠建模與仿真206
24. Instability of Fluid Flow and Level Fluctuation in Continuous Thin Slab Casting Mould207
25. A Coupled Electrical-Thermal-Mechanical Modeling of Gleeble Tensile Tests for
Ultra-High-Strength (UHS) Steel at a High Temperature214
26. Cellular Automaton Modeling of Austenite Nucleation and Growth in Hypoeutectoid Steel during
Heating Process231
27. Deformation Prediction of a Heavy Hydro Turbine Blade During the Casting Process
with Consideration of Martensitic Transformation242
28. Modeling of Species Transport and Macrosegregation in Heavy Steel Ingots255
29. Experimental Measurements for Numerical Simulation of Macrosegregation in a 36-Ton
Steel Ingot264
30. Three-Dimensional Simulation of Macrosegregation in a 36-Ton Steel Ingot Using a
Multicomponent Multiphase Model275
31.Analysis of internal crack in a six-ton P91 ingot286
第2篇學術會議報告
國際會議298
1. Experience on Modeling of Casting and Solidification Processes
(鑄造及凝固過程建模研究經驗)299
2. Progress on Multi-scale Modeling of Solidification Process of Advanced Casting Technology
(先進鑄造技術凝固過程的多尺度建模研究進展)304
3. Numerical Simulation of Macrosegregation in Large Steel Ingot with Multicomponent and
Multiphase Model(基于多成分和多相模型對大型鋼錠中宏觀偏析進行數值模擬研究)314
4. Multiscale Modeling and Simulation of Directional Solidification Process of Ni-based Superalloy
Turbine Blade Casting(鎳基高溫合金渦輪葉片鑄件定向凝固過程的多尺度建模與仿真研究)319
國內會議324
5.建模與仿真在裝備制造中的作用與前景325
6.高溫合金定向凝固葉片鑄件凝固過程建模與仿真進展331
第3篇制造業發展及制造強國戰略研究論文
1.發展資源節約環境友好的先進制造技術338
2.《中國制造2025》——建設制造強國之路344
3.數字化設計與制造是智能制造關鍵共性技術348
4.創新·強基·智能——建設制造強國351
第4篇戰略研究會議報告
國際會議360
1. Trend of Advanced Manufacturing Technology（先進制造技術發展趨勢）361
2. Status and Forecast of China Manufacturing Industry（中國制造業的現狀及展望）366
3. CHINA MANUFACTURING 2025——An Action Program for Strong Manufacturing Industry
（《中國制造2025》——建設制造強國行動綱領）371
4. Developing Intelligent Manufacturing——For a Strong Manufacturing Industry
（發展智能制造——建設制造強國）376
5. Modeling and Simulation——Key Technology for Digital Transformation of
Manufacturing Industry（建模與仿真——制造業數字化轉型關鍵技術）379
國內會議383
6.我國制造業科技發展戰略384
7.提高裝備制造業自主創新能力390
8.創新驅動強化基礎——建設制造強國400
9.加強先進基礎工藝創新能力403
第5篇留學情結與學術人生
1.“中國留學生的四十年”之柳百成：新留學潮開啟的見證者408
2.改革開放四十年之親歷者記柳百成：留學歲月照亮我的人生413
3.西風千里話轉折水木數載鑄人生——柳百成院士的學術人生416
4.懷念南翔同志學習南翔同志426
5.頑強拼搏、報效祖國428
第6篇祝賀與回憶
1.“中國鑄造杰出貢獻獎”頒獎詞434
2.“中國鑄造終身成就獎”頒獎詞435
3.桃李緣——賀導師柳百成院士清華任教60周年周昭喜436
4.跟著先生學知識學做人郭景杰437
5.久違的回憶郝守衛439
6.科學嚴謹治學、厚德載物育人——寫在柳百成先生從教60周年之際程軍441
7.教書育人，勇攀科技高峰李嘉榮443
8.賀柳老師執教六十年康進武445
9.李文勝博士回憶446
附錄赴國外及中國港澳臺地區參加重要學術交流活動表(1978—2019)448