[再版前言]

現代船舶結構設計(Modern Ship Structural Design)是上海交通大學國家一級重點學科“船舶與海洋工程”學科一門重要的研究生專業課程。從2004年至今，筆者已在上海交通大學主講本課程15學期,為配合該課程的教學工作,筆者于2013年編寫了《船舶結構設計與分析》的英文版教材。該教材出版以來，聽課的研究生在課堂學習中對本教材提出了一些中肯的改進意見，恰逢上海交通大學在2019年立項了“雙一流”研究生優質課程建設項目，這都為該教材的再次出版提供了支持和幫助。

在第二版的修訂調整過程中，本教材增加了下列新內容: (1) 講述了下列各型散貨船的結構要素和船型特點: 卡姆薩型散貨船、紐卡斯爾型散貨輪、瀨戶型散貨船、圣勞倫斯型散貨船、馬六甲型散貨船和敦刻爾克型散貨船。(2) 講述了散貨船艙口處的船體應力集中現象和局部加強措施，引用了國際船級社聯合會有關艙口蓋強度衡準的統一要求，即將艙口蓋上承受的海水壓力按一干舷和航速的函數來計算。(3) 講述了散貨船艙底淤泥隨船舶搖蕩而產生的自由面現象及其控制措施。(4) 講述了集裝箱船為了滿足《國際海上人命安全公約》的可視性要求而將橋樓結構前移的新設計方案，等等。

本書可用作船舶與海洋工程及土木工程專業本科生和研究生的專業教材，也可用作船舶結構工程師和船舶總體設計師的參考資料。同時本書的相關內容對從事結構設計的土木工程師和機械工程師也大有裨益。

在重新編寫本教材的過程中，筆者有幸得到了上海交通大學船舶海洋與建筑工程學院主管研究生教學工作的院領導和上海交通大學出版社各位責任編輯的大力支持和幫助，筆者對此表示衷心的感謝。

The material in this book has been continuously developed and improved since the author started to teach the course of “Modern Ship Structural Design” in the Department of Naval Architecture and Ocean Engineering of Shanghai Jiao Tong University (SJTU) in 2004. The subject of marine structural design and analysis is so broad that it is not possible to incorporate every aspect of this subject in one textbook. No attempt has been made to make the presentation complete in this book. However, the topics included in the book have been made as complete as possible so that they can be studied in their entirety without reference to other works. Most of the basic ideas of the subjects covered have been included. The book is intended to have at least two applications. It is expected that the book may be used as a textbook in both the undergraduate and graduate studies for students majoring in the areas of Naval Architecture, Ocean and Civil Engineering. On the other hand, the final results including handy tables and illustrations, may be referenced directly without going through detailed derivation. Therefore, the book should also be useful to the marine structural engineers and naval architects, as well as civil engineers and mechanical engineers who work on structural design.

Briefly, the organization of this book is as follows: Chapter 1 is an introduction to marine structural design including explanation of both the traditional design method and the modern design method. Chapter 2 outlines some marine structural design fundamentals including structural arrangements, structural materials, welding and some basic knowledge on classification societies and their rules. Chapter 3 and Chapter 4 consider loads and loads combinations in the process of marine structural design and how to calculate initial scantlings for a specific marine structure. Chapter 5 deals with the total strength assessment of an initially designed marine structure. Yielding, buckling and fatigue criteria are outlined in this chapter. Detailed explanations regarding spectral fatigue analysis of ship structures are also given in this chapter. Finally, Chapter 6 presents some fundamental knowledge about marine structural design optimization and several calculation examples. A knowledge of calculus, principles of naval architecture, strength of materials, solid mechanics and numerical optimization is the prerequisite for the complete use of this book.

It is my pleasure to acknowledge the help I received during the preparation of the first edition of this book. Among my students, my special thanks are due to Shi Yongpeng and He Yong, who ably assisted in a number of computations, and Zhang Youwen, who unfailingly assisted in putting the manuscript in proper order. The first edition of this book was published in 2013 and has since been successfully utilized as a textbook in my graduate course teaching in the Department of Naval Architecture and Ocean Engineering in SJTU. I am also grateful for those who have reviewed my application proposal for publishing the second edition of this book. Among my colleagues at the School of Naval Architecture, Ocean and Civil Engineering of SJTU, I am deeply indebted to the school vice dean for giving me strong support to finish writing this book. While it has been a joy to write this book, only the enjoyment and benefits realized by the readers will make my labor fruitful.

It is mentioned that during my utilization of the first edition of this book in my graduate course teaching in SJTU, I have received many valuable suggestions from my students in my class regarding how to continually improve the quality of the book. It was therefore envisioned that the publication of a second edition of this book including these valuable suggestions would be very much beneficial to the future students who would learn from the book. Through keen competition, this author won the funding for publishing this second edition book in 2019 from the “Double First Class” initiative in China. This generous funding, the author meticulous attention to the writing details and the book reviewers constructive comments all have contributed to the successful publication of this second edition.

A final suggestion to the future educators instructing marine structural design and analysis courses is to utilize this book in combination with the following supplement materials:

●ABS (American Bureau of Shipping) Rules for Building and Classing Steel Vessels, Part 3, Hull Construction and Equipment;

●ABS Rules for Building and Classing Steel Vessels, Part 5C, Specific Vessel Types (Chapters 16);

●ABS Rules for Building and Classing Steel Vessels, Part 5C, Specific Vessel Types (Chapters 713).